Why is my pool water cloudy even after shocking it?

[Ryan Brooks]

I shocked my pool two days ago because it was starting to look a little dull, but now the water’s still cloudy and hasn’t cleared up. Chlorine levels look fine, and I’ve been running the pump more than usual. Any ideas what’s going on? Did I do something wrong or is this just normal?

 

[Jake Roberts]

Cloudy water after shocking is actually pretty common, especially if your pool has a lot of fine particles or if your filter isn’t catching them fast enough. When you shock the water, it kills off contaminants, but it doesn’t remove them—your filter has to do that part. Try running your pump 24/7 for a day or two and maybe use a clarifier to help bind the particles together so the filter can catch them easier. Also check your pH if it’s off, chlorine won’t work as effectively.

 

[William Walker]

Cloudy water after shocking is indeed common, especially if your filter isn’t able to catch the finer particles. It’s also worth considering the chemical balance in your pool. Sometimes, the water stays cloudy due to high levels of total dissolved solids (TDS) or a pH imbalance. If your pool has had a lot of chlorine added, the effectiveness of your sanitizer may also be reduced, contributing to the cloudiness. I would recommend not just relying on the filter or clarifiers alone, but also ensuring that your pool’s chemistry is optimized. Test your TDS levels and check your pH, alkalinity, and calcium hardness regularly to help resolve the issue more effectively.

 

[Ella Robinson]

I’ve run into the same issue a couple times; shocked the pool, chlorine looked fine, but the water still stayed cloudy. I didn’t realize fine particles could hang around like that even after shocking. Has anyone had success with a specific clarifier brand, or is it more about running the filter longer? Just trying to avoid over-treating if I can help it.

 

[Ava Wilson]

Happened to me too! Sometimes shocking kicks up stuff that just takes time to filter out. I ran the pump nonstop for two days and used a clarifier—cleared right up. Just keep the pump going and be patient!

 

[Harper Clark]

A few days ago, I shocked my pool because the water was cloudy, but it’s still cloudy even though I’ve been running the pump longer. Turns out, cloudy water after shocking is normal, especially if the filter isn’t catching fine particles. I added a clarifier and checked the pool’s pH and calcium levels. After a while, the water started to clear up

 

[Jason Bennett]

Happened to me once too, and it drove me nuts because all the test numbers looked fine. In my case, it wasn’t the chemicals at all, it was more about the pool hardware. The filter just wasn’t grabbing the tiny stuff left behind after shocking. I ended up opening it up, gave it a proper clean, and also noticed the return jets weren’t angled the best. After adjusting those so the water circulated better, the cloudiness started clearing within a day.

Sometimes it’s not about adding more products, it’s just making sure the filter and circulation can actually move and trap everything that’s floating around.

 

[Lily Allen]

I think I’ve had the same issue! Once after shocking the pool, the water stayed cloudy and I couldn’t figure out why. Turns out, the filter wasn’t catching the fine particles. After cleaning the filter and adding a clarifier, the problem was solved! So, make sure to check your filter and pH levels!